CLS-EXP-DIM可以擴展CrestroniLux®集成照明系統(CLS-C6系列)和其他Crestron®照明調光器,以支持高達16安培的120,230 或277伏負載。它允許iLux系統的任何輸出通道調光LED,白熾燈,磁性低電壓,氖/冷陰極或2線可調光熒光照明負載的滿載電路。它也兼容CLW系列牆內調光器,並選擇CLX系列照明控制模塊。
CLS-EXP-DIM設計用於安裝到垂直表面,可以安裝在懸吊天花板上方的環境空氣處理空間中。在底部和底部提供管道敲除。所有連接均通過前蓋後面的螺絲端子進行。
1.功能特點
產品型號 |
CLS-EXP-DIM |
---|---|
Load Ratings | |
Dimmer Channels | 1 |
Load Rating | 16 Amps |
Minimum Load | 15 Watts at 120 Volts, 25 Watts at 230 Volts, 30 Watts at 277 Volts |
Load Types | LED[1], incandescent, neon/cold cathode, magnetic low voltage, 2-wire dimmable fluorescent (Advance Mark 10 Powerline® or equivalent) |
Input Voltages | |
Line Power | 120 to 277 Volts AC, 50/60 Hz |
Control Input | 120 or 230 Volts AC, 50/60 Hz, phase independent of line power and load |
Connections | |
INPUT, CTRL | (1) Captive screw terminal[5], control input from CLS(I)-C6 Series, CLW-DIM Series[2], CLX(I)-DIM Series, GLX-DIM6, GLXX-2DIM8, DIN-1DIM4, or DIN-1DIMU4 dimmers; Note: Presents a 25 Watt load to the controlling dimmer; a maximum of 5 CLS-EXP-DIM modules may be connected to the controlling dimmer, which cannot be wired to control any other loads besides the CLS-EXP-DIM modules |
INPUT, NEUT | (1) Captive screw terminal[5], neutral connection for control input |
OUTPUT, DIM OUT | (1) Captive screw terminal[5], dimmed load output |
OUTPUT, (NC) | (1) Captive screw terminal[5], not used (do not connect) |
OUTPUT, HOT | (1) Captive screw terminal[5], line power input |
OUTPUT, NEUT | (1) Captive screw terminal[5], neutral connection for line power input and load |
GROUND | (1) 3-terminal chassis ground bus bar |
Controls & Indicators | |
FLUORESCENT OFF THRESHOLD | (1) recessed screwdriver-adjustable trim pot behind removable cap, adjusts minimum brightness level |
STATUS | (1) Red LED behind front panel, illuminates when load output is on |
POWER | (1) Green LED behind front panel, indicates line power is applied to the HOT terminal |
Environmental | |
Temperature | 32° to 104°F (0° to 40°C) |
Humidity | 10% to 90% RH (non-condensing) |
Heat Dissipation | 140 BTU/Hr at maximum load, 16A |
Enclosure | |
Surface mount[4] module with (2) integral mounting flanges, galvanized steel w/gray matte powder coat front panel, extruded aluminum heat sink, (4) 1/2” or 3/4” conduit knockouts provided on bottom and lower left & right sides | |
Dimensions | |
Height | 8.82 in (224 mm) |
Width | 6.39 in (163 mm) |
Depth | 3.18 in (81 mm) |
Weight | |
3.34 lb (1.52 kg) | |
Standards & Certifications | |
UL Listed | |
CEC Title 24 2013 Compliant | |
Notes: | |
|