CLS-EXP-DIMFLV iLux®調光模塊
0-10V
- 與快思聰工作iLux®，CLW，DIN和CLX系列調光器。
- 模擬控制它的調光器的特性
- 最多可將5個擴展模塊連接到單個iLux調光器通道
- 支持120,230和277伏LED，白熾燈，NCC，MLV和2線可調光熒光負載。
- 包括用於設置最小熒光調光水平的閾值調整
- 內置氣隙繼電器輸出
- 掛在牆上或懸掛天花板上方
- 符合CEC標題24 2013年
產品詳細資訊
Product Description
CLS-EXP-DIMFLV是CrestroniLux®集成照明系統（CLS-C6系列）和其他Crestron®照明調光器的0-10伏調光擴展模塊。它也可用於切換不可調光負載。單個型號支持高達16安培的120,230或277伏負載。
iLux系統的任何輸出通道都可用於控制CLS-EXP-DIMFLV。它也兼容CLW系列牆內調光器，並選擇CLX系列照明控制模塊。所述的金屬外殼被設計成安裝到豎直表面上，它可以被安裝在一個吊頂上方的環境空氣處理空間。在設備的底部和底部提供導管敲擊。所有連接均通過前蓋後面的螺絲端子進行。
1.功能特點
- 與快思聰工作iLux®，CLW，DIN和CLX系列調光器。
- 模擬控制它的調光器的特性
- 共享一個iLux調光器通道，最多可擴展4個擴展模塊。
- 提供0-10伏調光控制
- 支持高達16安培的120,230或277伏負載。
- 支持非調光照明負載和電機的切換
- 內置氣隙繼電器
- 掛在牆上或懸掛天花板上方
- 符合CEC標題24 2013年
應用:
產品詳細規格
Additional Information
| 產品型號 |
CLS-EXP-DIMFLV |
|---|---|
| Load Ratings | |
| Dimmer Channels | 1 |
| Load Rating, Lamp | 16 Amps @ 120 to 277 Volts |
| Load Rating, Motor | 0.5 HP @ 120 Volts, 1 HP @ 230/277 Volts |
| Minimum Load | 15 Watts @ 120 Volts, 25 Watts @ 230 Volts, 30 Watts @ 277 Volts |
| Dim Load Types | 0-10 Volt fluorescent ballast or LED driver (4-wire) |
| Switch Load Types | LED, incandescent, fluorescent, magnetic low voltage, electronic low voltage, neon/cold cathode, high-intensity discharge (HID), motors |
| Input Voltages | |
| Line Power | 120 to 277 Volts AC, 50/60 Hz |
| Control Input | 120 or 230 Volts AC, 50/60 Hz, phase independent of line power and load |
| Connections | |
| INPUT, CTRL | (1) Captive screw terminal,[4] control input from CLS(I)-C6 Series, CLW-DIM Series,[1] CLXI)-DIM Series, GLX-DIM6, GLXX-2DIM8, DIN-1DIM4, or DIN-1DIMU4 dimmers; Note: Presents a 25 Watt load to the controlling dimmer; a maximum of 5 CLS-EXP-DIMFLV modules may be connected to the controlling dimmer, which cannot be wired to control any other loads besides the CLS-EXP-DIMFLV modules |
| INPUT, NEUT | (1) Captive screw terminal,[4] neutral connection for control input |
| OUTPUT, SW OUT | (1) Captive screw terminal,[4] switched load output |
| OUTPUT, HOT | (1) Captive screw terminal,[4] line power input |
| OUTPUT, NEUT | (1) Captive screw terminal,[4] neutral connection for line power input and load |
| 0-10V +/- | (2) Captive screw terminals,[4] dimming control output; Class 1 or Class 2 wiring allowed; Control Voltage is 0-10 Volts DC, 70 mA |
| GROUND | (1) 3-terminal chassis ground bus bar |
| Controls & Indicators | |
| STATUS | (1) Red LED behind front panel, illuminates when load output is on |
| POWER | (1) Green LED behind front panel, indicates line power is applied to the HOT terminal |
| Environmental | |
| Temperature | 32° to 104° F (0° to 40° C) |
| Humidity | 10% to 90% RH (non-condensing) |
| Heat Dissipation | 70 BTU/Hr at maximum load, 16A |
| Enclosure | |
| Surface mount[3] module with (2) integral mounting flanges, galvanized steel w/gray matte powder coat front panel, extruded aluminum heat sink, and (4) 1/2” or 3/4” conduit knockouts provided on bottom and lower left & right sides | |
| Dimensions | |
| Height | 8.82 in (224 mm) |
| Width | 6.39 in (163 mm) |
| Depth | 3.18 in (81 mm) |
| Weight | |
| 3.34 lb (1.52 kg) | |
| Standards & Certifications | |
| UL Listed | |
| CEC Title 24 2013 Compliant | |
| Notes: | |
|
|
