DIN-4DIMFLV4 DIN導軌高壓開關
0-10v 4ch
DIN-4DIMFLV4是一款4通道照明控制模塊，設計用於降低0-10伏的驅動器和鎮流器。單個型號支持120和220至240伏應用。DIN-4DIMFLV4也可用於切換高達5安培和1/2 HP電機的不可調光照明負載。
- 8路電源切換
- 支持120至240伏50/60赫茲
- 覆蓋輸入
- Cresnet通訊
- 通過前面板或軟件進行設置
- 可編程功能通過DIN-AP2
- 9M寬DIN導軌安裝
產品詳細資訊
Product Description
DIN-4DIMFLV4是一款4通道照明控制模塊，設計用於降低0-10伏的驅動器和鎮流器。單個型號支持120和220至240伏應用。DIN-4DIMFLV4也可用於切換高達5安培和1/2 HP電機的不可調光照明負載。
覆蓋輸入
DIN導軌安裝
Cresnet®
1.功能特點
- 提供4通道0-10伏調光控制
- 支持120和220至240伏，50/60赫茲的應用
- 允許切換照明和排風扇
- 包括覆蓋輸入
- 使用Cresnet®進行通信
- 通過前面板或軟件進行設置
- 通過DIN-AP2或DIN-AP3提供可編程功能
- 安裝在9M寬的DIN導軌上
- 符合CEC標題24 2013年
應用:
產品詳細規格
Additional Information
| 產品型號 |
DIN-4DIMFLV4 |
|---|---|
| Load Ratings | |
| Dimmer Channels | 4 |
| Maximum Per Channel | 5 Amps @ 120 to 240 Volts AC, 50/60 Hz; 600 Watts @ 120 Volts AC; 1150 Watts @ 230 Volts AC; 1200 Watts @ 240 Volts AC, 0.5 HP; 16 Amps Resistive |
| Module Total | 20 Amps @ 120 to 240 Volts AC, 50/60 Hz; 2400 Watts @ 120 Volts AC; 4600 Watts @ 230 Volts AC; 4800 Watts @ 240 Volts AC |
| Dim Load Types | 0-10 Volt fluorescent ballast or LED driver (4-wire); Maximum of 30 dimmable ballasts/drivers |
| Switch Load Types[1] | Incandescent, magnetic low-voltage, electronic low-voltage, neon/cold cathode, fluorescent, motors |
| Connections | |
| OUTPUT 1 – 4 | (2) 4-pin 3.5mm detachable terminal blocks comprising (4) isolated dimming control outputs; Voltage Control Range: 0 to 10 Volts DC; Maximum Sink Current: 60mA per channel; Output Resolution: 1024 levels (10 bit) |
| 1 – 4 | (4) sets of (2) captive screw terminals; Isolated Class 1 SPST relay switch circuits 1 – 4; Relay Rating: 5 Amps maximum per channel; Maximum Wire Size: 12 AWG (2.5 mm²) |
| NET | (2) 4-pin 3.5mm detachable terminal blocks, paralleled; Cresnet® slave port |
| OVERRIDE | (2) 2-pin 3.5mm detachable terminal blocks, paralleled; Sensing input for external low-voltage contact closure; Activates override mode when a closure is present; Minimum Closure Rating: 10mA (per module) at 24 Volts |
| Controls & Indicators | |
| 1 – 4 | (4) Red LEDs and (4) miniature pushbuttons for status indication and local control of each channel |
| NET ID | (2) 7-Segment green LED digits and (2) miniature pushbuttons for setting Cresnet ID; digits also display output levels |
| SETUP | (1) Red LED and (1) recessed miniature pushbutton for enabling setup mode and touch-settable ID |
| OVR | (1) Red LED and (1) miniature pushbutton for enabling override mode and saving override presets |
| PWR | (1) Green LED, illuminates when DC power is applied to the NET port |
| NET | (1) Yellow LED, indicates communication with the control processor |
| RESET | (1) Recessed miniature pushbutton, resets internal processor |
| Enclosure | |
| Light gray polycarbonate housing with polycarbonate label overlay, UL94 V-0 rated, 35mm DIN EN 60715 rail mount, DIN 43880 form factor for enclosures with 45mm front panel cutout, occupies 9 DIN module spaces (162mm) | |
| Power Requirements | |
| Cresnet Power Usage | 4.2 Watts (0.18 Amps) @ 24 Volts DC |
| Environmental | |
| Temperature | 32° to 104° F (0° to 40° C) |
| Humidity | 10% to 90% RH (non-condensing) |
| Heat Dissipation | 17 BTU/hr |
| Dimensions | |
| Height | 3.71 in (95 mm) |
| Width | 6.26 in (159 mm) |
| Depth | 2.35 in (60 mm) |
| Weight | |
| 9.2 oz (260 g) | |
| Standards & Certifications | |
| UL Listed | |
| CE | |
| CEC Title 24 2013 Compliant | |
| Notes: | |
|
|
