CLSI-C6M 壁掛式照明系統
6ch 220V Motion
帶有運動檢測器的iLux®集成照明系統 - 國際版
- 壁掛式集成照明和燈罩控制
- 6通道調光或切換
- 6組陰影和懸垂控制
- 支持的Cresnet ®佔用傳感器和百葉窗
- 可連接多達54個照明通道和54個遮光組
- 多達16個用戶設置的場景
- 7個可配置的“搖桿”按鈕，帶有可自定義的標籤條
產品詳細資訊
Product Description
iLux ® CLSI-C6M是專為壁掛式安裝在會議室，禮堂，家庭影院，或照明和陰影的任何地方靈活和成本的有效控制安裝一個完整的，集成照明系統是必需的。快思聰®聲譽創新和可靠性，結合高品質的綜合調光，本地的窗簾控制，可配置的搖桿按鍵，廣泛的集成能力，以及其他許多先進功能，使得iLux的理想選擇各類室內燈光和窗簾控制應用。
6通道調光
6組遮陽控制
多功能前面板控制
內置運動檢測器
多點鍵盤控制
多單元擴展
控制系統集成
對於使用Crestron的infiNET TM無線技術而不是Cresnet 的解決方案，請參閱CLSI-C6MRF。
1.功能特點
- 壁掛式集成照明和燈罩控制
- 6通道調光或切換
- 6組陰影和懸垂控制
- 支持的Cresnet ®佔用傳感器和百葉窗
- 可連接多達54個照明通道和54個遮光組
- 多達16個用戶設置的場景
- 7個可配置的“搖桿”按鈕，帶有可自定義的標籤條
- 大的ON和OFF按鈕
- 翻轉前蓋顯示設置控制和編程端口
- 六個條形圖顯示照明水平和陰影位置
- 前面板或iLux易於安裝® Designer軟件
- 內置運動檢測器
- 支持使用多達16個鍵盤的多點控制
- 可選IR遙控器
- 主氣隙繼電器
- 通過Cresnet與控制系統集成
- 節能ASHRAE 90.1 / LEED符合
- 有杏仁，黑色或白色
- 通過CLS-EXP系列模塊擴展負載類型支持
產品詳細規格
Additional Information
| 產品型號 |
CLSI-C6M |
|---|---|
| Load Ratings | |
| Dimmer Channels | 6 |
| Maximum Per Channel | 800 Watts/VA (3.5 Amps @ 230 Volts AC) |
| Minimum Per Channel | 25 Watts/VA (0.108 Amps @ 230 Volts AC) |
| Module Total | 2200 Watts/VA (10 Amps @ 220 Volts AC); 2300 Watts/VA (10 Amps @ 230 Volts AC); 2400 Watts/VA (10 Amps @ 240 Volts AC) |
| Load Types | LED[1], Incandescent, Magnetic Low-voltage, Neon/Cold Cathode, 2-Wire Dimmable Fluorescent, & Non-Dim Lighting (also: Electronic Low-voltage, 3- and 4-Wire Fluorescent, High-Inrush Switching, & 277V via CLS-EXP Series expansion modules) |
| Power Requirements | |
| 220 to 240 Volts AC, 50/60Hz line power | |
| Connections | |
| LOCAL DEVICES | (1) 4-pin 5mm detachable terminal block; Cresnet® Master port for local devices including: C2N-DB and CNX-B Series keypads, 16 maximum; C2N-SSC-2 and C2N-SDC-DC shade controllers; 16 maximum; Additional CLSI-C6M or CLSI-C6 units, 8 maximum; Additional CNPWSI-75 or other Cresnet power supply required beyond 4 devices; C2N-SDC-DC always requires an additional power supply |
| CONTROL SYSTEM | (1) 4-pin 5mm detachable terminal block; Cresnet Slave port for connection to a control system |
| HOT | (1) Captive screw terminal[3], line power input |
| LOAD1 – LOAD6 | (6) Captive screw terminals[3], dimmer channel outputs 1 – 6 |
| NEUTRAL | (1) Captive screw terminal[3] |
| GROUND | (1) Captive screw terminal[3] |
| PC (front) | (1) 3.5mm TRS mini-phone jack, RS-232 Programming port |
| Controls | |
| Buttons 1 – 6 | (6) 3-position rocker pushbuttons; configurable to recall (or toggle recall/off) individual scenes, control shades, or for master lighting or shade control; “scene mastering” option enables manual dimming utilizing rocker button action; also used to adjust lighting levels when in “Lighting” mode and shade positions when in “Shades” mode; additional functionality configurable via software |
| Up/Down Button | (1) 3-position rocker pushbutton; configurable for master lighting or shade control, or as a “shift” for Buttons 1-6; additional functionality configurable via software |
| ON | (1) pushbutton, recalls “On” scene |
| OFF | (1) pushbutton, turns all lights off |
| LIGHTS, SHADES | (2) Pushbuttons, select “Lights” or “Shades” modes |
| SAVE, CANCEL, ∧, ∨ | (4) Pushbuttons, navigate and execute setup functions |
| Reset | Recessed miniature pushbutton for hardware reset |
| Dimming Ramp Rate | 5 seconds (default), software adjustable 1 to 10 seconds |
| Scene Fade Time | 2 seconds (default), software adjustable 0 seconds to 99 minutes |
| LED Indicators | |
| Scenes | (6-white) Correspond with each “Scene” Button |
| High/Low | (2-white) Indicate “Shift” status |
| ON | (1-white) Indicates “On” Scene is selected |
| LIGHTS, SHADES | (2-green) Indicates “Lights” or “Shades” mode is active |
| SAVE, CANCEL | (2-green) Correspond with “Save” and “Cancel” Buttons |
| MIN, SEC | (2-green) Indicates display of “Minutes” or “Seconds” |
| 1 – 6 | (6-green) 7-Segment bargraphs, indicate lighting levels and shade positions |
| Numeric Display | (2-green) 8-Segment digits, indicates modes and setup values |
| IR Receiver | |
| Reception Frequency | 36 kHz |
| Requires CLS-IRHT8 IR remote, sold separately | |
| Motion Detector | |
| Type | Infrared |
| Range | 20 to 30 feet at 4 foot elevation |
| Environmental | |
| Temperature | 32° to 104°F (0° to 40°C) |
| Humidity | 10% to 90% RH (non-condensing) |
| Enclosure | |
| Mounts in a 4-gang electrical box, 3-1/2" (89 mm) deep minimum | |
| Dimensions | |
| Height | 4.48 in (114 mm) |
| Width | 8.89 in (226 mm) |
| Depth | 2.60 in (67 mm) |
| Weight | |
| 1.43 lb (649 g) | |
| Notes: | |
|
|
