DIN-BLOCK DIN導軌Cresnet配電箱
Cresnet Distribution 12Port
DIN-BLOCK是一種DIN導軌安裝的Cresnet配電塊，旨在方便終端或分配點處的Cresnet接線。DIN導軌安裝可以與Crestron DIN Rail照明和自動化控制模塊以及其他第三方DIN導軌安裝設備一起進行模塊化安裝。
- 12端口Cresnet分配塊
- 可拆卸螺絲接線端子，方便終端和故障排除
- 分體式電源總線，靈活的24V配電
- 用於網絡電源和數據的診斷LED
- 被動設備 - 無需編程
- 6M寬DIN導軌安裝
產品詳細資訊
Product Description
DIN-BLOCK是一種DIN導軌安裝的Cresnet配電塊，旨在方便終端或分配點處的Cresnet接線。DIN導軌安裝可以與Crestron DIN Rail照明和自動化控制模塊以及其他第三方DIN導軌安裝設備一起進行模塊化安裝。
Cresnet®分銷
Cresnet配電
DIN導軌安裝
1.功能特點
- 12端口Cresnet分配塊
- 可拆卸螺絲接線端子，方便終端和故障排除
- 分體式電源總線，靈活的24V配電
- 用於網絡電源和數據的診斷LED
- 被動設備 - 無需編程
- 6M寬DIN導軌安裝
應用:
產品詳細規格
Additional Information
| 產品型號 |
DIN-BLOCK |
|---|---|
| Load Ratings | |
| POWER A | (6) 4-pin 3.5mm detachable terminal blocks, paralleled; Power Group A Cresnet distribution ports; Maximum Load: 75 Watts (3.13 Amps @ 24 Volts DC) |
| POWER B | (6) 4-pin 3.5mm detachable terminal blocks, paralleled; Power Group B Cresnet distribution ports; Maximum Load: 75 Watts (3.13 Amps @ 24 Volts DC) |
| Note: ‘Y’, ‘Z’, and ‘G’ terminals are paralleled between power groups | |
| LED Indicators | |
| POWER A – B | (2 green) Indicate Cresnet power present at any NET port of each corresponding power group |
| Y, Z | (2 red) Indicate Cresnet Y and Z data activity at any NET port |
| Power Requirements | |
| Cresnet Power Usage | 0.3 Watts (0.01 Amp @ 24 Volts DC) |
| Environmental | |
| Temperature | 32° to 104°F (0° to 40°C) |
| Humidity | 10% to 90% RH (non-condensing) |
| Heat Dissipation | 1 BTU/hr |
| Enclosure | |
| Light gray polycarbonate housing with polycarbonate label overlay, UL94 V-0 rated, 35mm DIN EN 60715 rail mount, DIN 43880 form factor for enclosures with 45mm front panel cutout, occupies 6 DIN module spaces (108mm) | |
| Dimensions | |
| Height | 3.71 in (94.2 mm) |
| Width | 4.18 in (106 mm) |
| Depth | 2.29 in (58.0 mm) |
| Weight | |
| 5.0 oz (148 g) | |
| Notes: | |
|
|
