GLX-DIMFLV8 8通道0-10V調光模塊
0-10V 8ch
- 8通道0-10伏調光控制
- 兼容照明和電機負載
- 支持100到277伏應用
- 每通道16安培負載額定值
- 無弧切換
- 每個輸出端的正氣隙
- 相位獨立的通道
- Cresnet®通信
產品詳細資訊
Product Description
GLX-DIMFLV8是Crestron GreenLight®建築調光模塊，具有8通道0-10伏調光控制功能。該模塊是Crestron®完整GLPD的一部分。
綠燈調光面板
1.功能特點
- 8通道0-10伏調光控制
- 兼容照明和電機負載
- 支持100到277伏應用
- 每通道16安培負載額定值
- 無弧切換
- 每個輸出端的正氣隙
- 相位獨立的通道
- Cresnet®通信
- 冗餘電源能力模塊通過線路或Cresnet供電
- 用於測試和驗證的本地控制
- 本地和遠程覆蓋功能
- 非易失性電源故障記憶
- GLE機櫃安裝
- 符合CEC標題24 2013年
產品詳細規格
Additional Information
| 產品型號 |
GLX-DIMFLV8 |
|---|---|
| Load Ratings | |
| Dimmer Channels | 8 |
| Per Channel | 16 Amps @ 100 to 277 Volts AC, 50/60 Hz; 0.5 HP @ 120 Volts, 1 HP @ 230 Volts, 1 HP @ 277 Volts |
| Dim Load Types | 0-10 Volt fluorescent ballast or LED driver (4-wire); 60 mA max current sink |
| Switch Load Types | Incandescent, magnetic low-voltage, electronic low-voltage, neon/cold cathode, fluorescent ballast, high-intensity discharge, motor, LED |
| Relay Lifetime | 1,000,000 on/off operations at full electronic ballast load |
| Power Requirements | |
| Primary | 100-277 Volts AC, 50/60Hz, supplied via channel 1 (L1, N) |
| Secondary (optional) | 5 Watts @ 24 Volts DC, supplied via Cresnet® |
| Connectors | |
| NET | (2) 5-pin headers, connects via included interconnect cable to adjacent module or internal connecting block |
| N | (1) terminal block, line input neutral |
| L1-L8 | (8) Terminal blocks,[1] line power inputs |
| SW1-SW8 | (8) Terminal blocks, switch channel outputs |
| 0-10V DIM (COMMON) | (1) 8-position terminal block,[2] dim channel common |
| 0-10V DIM (+) | (1)-8 position terminal block,[2] dim channel output, galvanically isolated; May be wired as Class 1 or Class 2 |
| Controls & Indicators | |
| NET ID | (2) 7-segment green LED digits and (2) miniature pushbuttons, sets Cresnet ID |
| SETUP | (1) Red LED and (1) recessed miniature pushbutton, enables setup mode and touch-settable ID |
| OVR | (1) Red LED and (1) miniature pushbutton, enables override mode and saves override presets |
| PWR | (1) Green LED, indicates power status; Solid illumination indicates line power is applied to N and L1; Flashing indicates Cresnet power is supplied in absence of line power |
| NET | (1) Yellow LED, indicates communication with control processor |
| RESET | (1) Recessed miniature pushbutton, resets internal processor |
| Channel Section | |
| ON/DIM | (2) Red LEDs per each channel, "ON" indicates channel is at a non-zero level, "DIM" indicates channel is at a non-zero level below 100% |
| UP/DN | (16) Miniature pushbuttons, manually activates individual channels for dimming |
| DIM/NON-DIM | (8) Recessed miniature switches, sets channel mode; When set to "NON-DIM" module will ignore dim commands |
| Enclosure | |
| Surface mount module, mounts in a GLE enclosure | |
| Environmental | |
| Temperature | 32° to 104° F (0° to 40° C) |
| Humidity | 10% to 90% RH (non-condensing) |
| Heat Dissipation | 116 BTU/Hr |
| Dimensions | |
| Height | 14.5 in (368 mm) |
| Width | 6 in (152 mm) |
| Depth | 3.04 in (77 mm) |
| Electrical Regulatory Certifications | |
| UL508, Section 41 (Endurance Test) and Section 61C (Electronic Ballasts) | |
| UL924, Emergency Power Equipment | |
| IEC60669-2-1, Section 19.102 (Contact mechanisms incorporated in electronic switches, intended for fluorescent lamp circuits or other capacitive loads) | |
| SCCR Rating - 65kA | |
| CE | |
| CEC Title 24 2013 Compliant | |
| Notes: | |
|
|
